Skip to content

Electrical and electronics engineer CV example: power, automation and electronics

Say in the headline whether you work in power, automation or electronics, then show voltage levels, systems, PLC or design tools and measured results, and list EMO certificates or FE, PE or CEng status by their exact names.1

Written 13 October 2026. CitedCV. How we write our guides

Power, automation or electronics: say it in the headline

The Bureau of Labor Statistics draws the line clearly. Electrical engineers design, develop, test and supervise the manufacture of electrical systems and equipment such as motors and power generation equipment; electronics engineers design the components and circuitry of electronic products. Automation work sits between the two. A recruiter for a substation contractor and one for a consumer electronics firm will each stop reading if the top third of your CV belongs to the other world.

TrackHeadline that worksNumbers to giveTools O*NET lists for the occupation
PowerElectrical design engineer, MV/LVVoltage level, transformer rating in kVA or MVA, cable length, number of panelsETAP, AutoCAD
AutomationAutomation and controls engineerI/O count, number of drives, lines or machines, downtime before and afterPLC software, SCADA, AVEVA InTouch HMI
ElectronicsElectronics hardware engineerBoard layers, component count, test coverage, units shippedMATLAB and Simulink, PSIM, C

Write the exact title on your diploma

In Türkiye the diploma title changes what you may do, and readers know it. The site chief regulation lists electrical engineers, and electrical-electronics engineers whose equivalence to electrical engineering a higher education institution has accepted. EMO's high-voltage training is open to electrical and electrical-electronics engineers but reviews the transcript of the latter first. So write Elektrik Mühendisliği or Elektrik-Elektronik Mühendisliği exactly as printed, and note a positive transcript review if you have had one.

Building the credential block, step by step

  1. Chamber: article 33 of Law 6235 obliges engineers doing professional work to register with the chamber for their branch, here the Elektrik Mühendisleri Odası (EMO). Permanent public employees may choose. Give membership and registration number under your name.
  2. Freelance and project signing: EMO's member portal lists the SMM application among its online services. EMO's old regulation pages now return a not-found error, so this page does not list SMM conditions; ask your branch.
  3. Training certificates: EMO's in-service training centre, MİSEM, issues authorisation certificates after its courses. Write each one by its exact name and year.
  4. Site chief: if you are eligible under the regulation and have done it, list each job with floor area and dates.
  5. Abroad: FE and PE in the US, professional registration in the UK, and the country pages for Europe.

Two EMO certificates, by their exact names

Certificate on the EMO course pageCourseWho may attendMember fee listed for October 2026 courses
Yüksek Gerilim Tesislerinde İşletme Sorumluluğu Yetkilendirme Belgesi3 days, 18 hours: HV grounding, power and instrument transformers, distribution protection, compensation and harmonics, switching, safetyElectrical and electrical-electronics engineers; transcript reviewed for the latter10,000 TL
1kV Üstü ve 1kV Altı Topraklama Yetkilendirme Belgesi3 days, 18 hours: earthing design and measurement for low and high voltageElectrical, electrical-electronics, electronics and communication engineers; no transcript review9,000 TL

The high-voltage course page says it exists because the renewed regulation on heavy-current installations put the role of the operating responsible engineer in focus. If you hold that role, the CV line is short and exact: 'HV operating responsible engineer, 34.5 kV, 2 × 2,500 kVA, since 2023'.

Outside Türkiye

BLS says licensure is not required for entry-level electrical and electronics engineers; experienced engineers may obtain a PE licence, which lets them supervise others and sign off on projects, after the FE exam and work experience. NCEES runs the PE in Electrical and Computer with three areas: Power, Electrical and Electronics, and Computer Engineering. In the UK, the National Careers Service says professional registration can lead to senior roles, and points to the Institution of Engineering and Technology (IET).

PLC and automation lines a reader can test

Automation hiring managers often ask candidates to talk through a program they wrote. Give them something to ask about. A line that names the controller family, the software, the size and the result invites a real conversation; 'PLC programming' invites a quiz.

  • Controller family and software, for example Siemens S7-1500 in TIA Portal or Rockwell in Studio 5000.
  • Size: I/O points, drives, HMI screens, number of machines or lines.
  • Your part: new program, modification, migration from an old controller, or commissioning only.
  • Result: downtime, cycle time, energy, or a fault you found.

On the electronics side

  • Board: layers, main components, the design tool you used.
  • Firmware: language, microcontroller family, size of the codebase you owned.
  • Test: what you measured, with which equipment, and the yield or failure rate that changed.

Skills table for the example below

SkillProof lineTrack
MV/LV design34.5 kV feeder and 2 × 2,500 kVA substation, ETAP short-circuit studyPower
PLCSiemens S7-1500, 1,100 I/O, migration from S7-300Automation
Drives42 frequency inverters on the raw mill lineAutomation
EarthingEarthing measurements for the plant, EMO certificatePower
Team9 electricians and 2 technicians on 3 shiftsBoth

Worked example: a power and automation engineer

Example only. Burak Tunç is an invented person; the figures show the form a heavy-industry employer would expect. Write only what you can prove.

Header

Burak Tunç, Electrical Engineer (BSc Elektrik Mühendisliği, 2017), EMO member, Eskişehir. Power distribution and plant automation; holds the EMO HV operating responsibility and earthing certificates.

Electrical and Automation Chief, Anadolu Çimento, 2021 to present

  • HV operating responsible engineer for the plant’s 34.5 kV intake and 2 × 2,500 kVA transformers.
  • Led the migration of the raw mill line from S7-300 to S7-1500 in TIA Portal, 1,100 I/O, during a 9-day shutdown; unplanned electrical stops fell from 41 to 17 hours a quarter.
  • Manages 9 electricians and 2 technicians across 3 shifts and the yearly earthing measurements.

Project Engineer, Nur Elektrik Taahhüt, Ankara, 2017 to 2021

  • Designed LV distribution for 6 industrial buildings, 120 panels in total, with selectivity checked in ETAP.
  • Prepared as-built drawings in AutoCAD and handed over 4 substations to the distribution company.

Certificates

  • Yüksek Gerilim Tesislerinde İşletme Sorumluluğu Yetkilendirme Belgesi, EMO, 2022.
  • 1kV Üstü ve 1kV Altı Topraklama Yetkilendirme Belgesi, EMO, 2023.
  • English B2.

Certificate names are left in Turkish with a short English gloss in the header; a foreign reader can look them up, and a Turkish reader recognises them at once.

Evidence behind this page

All sources below were read on 13 October 2026. Course fees and dates belong to the October 2026 sessions shown on the EMO portal and change.

StatementSource
Electrical vs electronics engineers; licensure; PE after FE and experienceBLS, Electrical and Electronics Engineers (modified 27 August 2026)
Chamber registration dutyLaw 6235, article 33
SMM application among online services; MİSEM coursesEMO member portal
HV certificate name, content, eligibility, transcript review, fee, purposeEMO portal, YG Tesislerinde İşletme Sorumluluğu Eğitimi
Earthing certificate name, eligibility, feeEMO portal, Elektrik Tesislerinde Topraklamalar Eğitimi
Site chief titles incl. electrical-electronics equivalenceŞantiye Şefleri Hakkında Yönetmelik, article 6 (2019)
PLC, SCADA, HMI, ETAP, Simulink, PSIMO*NET OnLine, 17-2071.00
PE Electrical and Computer areasNCEES, PE exam
Professional registration; IETNational Careers Service, Electrical engineer

Limits

  • We could not open EMO's current SMM regulation, so its conditions and fees are not on this page.
  • Electricians and technicians with vocational certificates belong on the electrician page.
  • Computer engineers whose degree title says computer, not electrical, have their own page.
  • This page does not tell you whether you may act as operating responsible engineer for a given plant; the regulation and EMO decide.

Abroad, and what to do this week

For Germany, the engineer page covers the protected title and naming VDE standards; the Netherlands has its own engineer page. This page leaves both to them. Abroad, voltage levels, ratings and controller families translate without help; Turkish certificate names need the short gloss shown above.

  1. Pick power, automation or electronics for this application and write it in the headline.
  2. Add a unit to every system you mention: kV, kVA, I/O, layers.
  3. List EMO certificates by exact name and year.
  4. Mark your diploma title exactly as printed.
  5. Run the draft through the free ATS checker.

CitedCV can write the CV in English, Turkish or German from the systems, ratings and results you enter. Each line stays linked to the facts it came from, and lines it cannot verify against them are removed. Which certificates you hold is your input, not its knowledge.

Questions people ask

What should an electrical engineer put on a CV?

Your track (power, automation or electronics), diploma title, EMO or licence status, and for each job the system, its rating or size, your tools and one result.

How do I write PLC experience on a CV?

Name the controller family and software, the I/O count, whether you wrote, changed or migrated the program, and the result such as downtime saved.

What is the difference between an electrical and an electronics engineer CV?

An electrical CV shows systems and ratings such as kV and kVA; an electronics CV shows boards, components, firmware and test results.

Should I list EMO certificates on my CV?

Yes, each by its exact name and year, such as the HV operating responsibility or earthing authorisation certificate, because Turkish employers look for them by name.

What is HV operating responsibility (YG işletme sorumluluğu)?

It is the role of the engineer responsible for running a high-voltage installation; EMO trains and certifies it in a three-day, 18-hour course.

Do electrical engineers need a PE license?

Not for entry-level jobs, according to BLS; experienced engineers may get a PE licence to supervise others and sign off on projects.

Can an electrical-electronics engineer be a site chief in Türkiye?

Yes, if a higher education institution has accepted the degree as equivalent to electrical engineering, according to the site chief regulation.

Which software should an electrical engineer list?

Only what you used, tied to a task: ETAP for studies, AutoCAD for drawings, TIA Portal or similar for PLCs, Simulink or a PCB tool for electronics.

Sources

  1. BLS Occupational Outlook Handbook, Electrical and Electronics Engineerswww.bls.gov/ooh/architecture-and-engineering/electrical-and-electronics-engineers.htm
  2. Law 6235, Türk Mühendis ve Mimar Odaları Birliği Kanunu (mevzuat.gov.tr)www.mevzuat.gov.tr/MevzuatMetin/1.3.6235.pdf
  3. EMO member portalportal.emo.org.tr/
  4. EMO portal, YG Tesislerinde İşletme Sorumluluğu Eğitimiportal.emo.org.tr/egitim/yg-tesislerinde-isletme-sorumlulugu-egitimi-450011899
  5. EMO portal, Elektrik Tesislerinde Topraklamalar Eğitimiportal.emo.org.tr/egitim/elektrik-tesislerinde-topraklamalar-egitimi-450011863
  6. Resmî Gazete, Şantiye Şefleri Hakkında Yönetmelik (2 March 2019)www.resmigazete.gov.tr/eskiler/2019/03/20190302-2.htm
  7. O*NET OnLine, Electrical Engineers 17-2071.00www.onetonline.org/link/details/17-2071.00
  8. NCEES, PE examncees.org/exams/pe-exam/
  9. National Careers Service, Electrical engineernationalcareers.service.gov.uk/job-profiles/electrical-engineer